Print Troubleshooting
Failed print? Find the cause and the exact fix: first-layer adhesion, stringing, warping, under-extrusion, layer shifts and the rest, in the order that actually works.
How to Fix Under-Extrusion: The Settings (and Order) That Actually Work
Under-extrusion is one of the most common — and most misdiagnosed — FDM problems. It happens when your printer doesn’t push enough filament to fill the layers it’s been…
Elephant Foot Fix in PrusaSlicer: The Setting That Works (and the Causes Behind It)
If the bottom of your print is bulging out wider than the rest of the part, you’ve got elephant’s foot — and you’re probably here for a quick elephant foot fix in…
First Layer Not Sticking? The Real Causes and Exact Fixes
When your first layer not sticking is the problem, nothing else you’ve dialled in matters. The first layer is the foundation every layer above depends on. Get it wrong…
Why Is My 3D Print Failing? The Real Causes and Exact Fixes
If you’re staring at a botched print and asking why is my 3D print failing, the honest answer is that most failures trace back to a handful of root causes — and almost…
How to Fix Warping in 3D Prints: The Exact Settings That Work
Warping is the failure that ruins prints hours in: corners curl up, the base lifts off the bed, and what looked like a clean first layer turns into a banana. If you’re…
PETG Stringing Fix: The OrcaSlicer Settings That Actually Work
If you’ve printed even one spool of PETG, you’ve met the spider webs: fine, fuzzy strands draped across your part, bridging every travel move. The good news is that a…
First Layer Adhesion Problems with PLA: The Real Causes and Exact Fixes
PLA is meant to be the easy one. Low print temperature, minimal warping, forgiving on a cold day. So when you hit first layer adhesion problems with PLA, it’s genuinely…
First Layer Adhesion Issues with PETG: Why It Sticks Too Well (and Sometimes Not at All)
If you’ve come from PLA, PETG breaks your instincts. The most common first layer adhesion issues with PETG aren’t about prints lifting off the bed — they’re about prints…
How to Diagnose a Failed 3D Print From a Photo (Fast, Accurate, Actionable)
Stringing, warping, layer shifts, blobs, gaps — every maker hits a wall where the print looks wrong but the cause isn’t obvious. The fastest way to fix it is to diagnose…
What Causes Print Failure? The Real Culprits and How to Fix Them
If you’ve spent any time at the printer, you already know the sinking feeling of coming back to a spaghetti monster instead of a finished part. So what causes print…