OctoFarm has not shipped a stable release since October 2022, the project has openly asked for new maintainers, and the companion FarmPi Raspberry Pi image was archived read-only on 2024-02-07. If you are still running it, that matters: there is no built-in failure detection, browsers start to struggle past roughly 12 printers, and you are maintaining a Node.js server, a MongoDB instance and a separate OctoPrint install per machine with no upstream fixes coming. The good news is that the gap left behind is now well covered. This guide walks through the best OctoFarm alternative options for 2026 — one near-identical open-source successor, a monitoring specialist, two cloud fleet platforms, the vendor-native tools, and an end-to-end order-to-despatch system for anyone selling printed parts.
The right choice depends on one question: are you unifying a mixed fleet under one dashboard, adding failure detection to printers you already monitor, or running a production line that turns web orders into despatched parts? Those are three different jobs, and no single tool is best at all three.
What OctoFarm actually did — and what you’re replacing
OctoFarm was a web server-and-client combination that unified multiple OctoPrint instances into one interface. Every printer ran its own OctoPrint; OctoFarm sat above them for monitoring and batch control. To stand it up yourself you needed:
- A server running Node.js (v14+) and MongoDB (v3.6+).
- An OctoPrint instance (v1.3.9+) per printer.
- Docker images were offered —
octofarm/octofarm:latestandalpine-latestboth require you to supply MongoDB, whilemonolithic-latestbundles it. - Your own time patching, backing up and babysitting the stack.
What it never had: AI failure detection, native filament tracking tied to real cost, or any connection to orders. Keep that in mind when you compare — several alternatives do far more than OctoFarm ever did, so “replacement” isn’t always like-for-like.
The seven alternatives at a glance
| Tool | Type | Printer support | Failure detection | Best for |
|---|---|---|---|---|
| FDM Monster | Self-hosted, FOSS | OctoPrint, Moonraker/Klipper, PrusaLink, Bambu LAN | No (roadmap) | Direct OctoFarm successor |
| Obico | Self-host or cloud | OctoPrint, Klipper, Bambu | Yes (open-source AI) | Monitoring + remote access |
| SimplyPrint | Cloud, commercial | Bambu, Klipper, Prusa, Marlin, Duet, OctoPrint | Yes | Mixed cloud fleets |
| Printago | Cloud, commercial | Bambu (cloud+LAN), Klipper, Prusa | Yes | Order fulfilment |
| Prusa Connect | Cloud / self-host (local) | Prusa only | No native | All-Prusa farms |
| Bambu Farm Manager | Local server | Bambu only | Camera-based | All-Bambu farms |
| Ask The Nozzle Printer Farm | Cloud + local agent | Creality/Klipper, Bambu LAN, FlashForge, OctoPrint, PrusaLink, Duet | Yes (camera AI) | Order-to-despatch production |
1. FDM Monster — the closest open-source successor
If you want a drop-in replacement that behaves like OctoFarm, this is it. FDM Monster started life as a fork of OctoFarm and is now actively maintained under AGPL-3.0, where the upstream project stalled. Crucially, it can import printers directly from OctoFarm, so migration isn’t a from-scratch rebuild.
It manages OctoPrint, Moonraker/Klipper, PrusaLink and Bambu Lab in LAN mode (LAN only, not cloud). You drag printers onto a customisable grid, drag-and-drop G-code to print, select multiple printers to batch a single file, and mark machines “under maintenance”. It runs from a Docker image, a Raspberry Pi image called MonsterPi, or a Linux install script, and stores data in SQLite rather than MongoDB — a welcome simplification over the old stack. The maintainers describe it as battle-tested at 100+ printers.
The gaps worth knowing: no built-in AI failure detection yet (print queue, Spoolman integration and extended webcam support are on the roadmap), and you are still self-hosting — you own the patching and backups. For a self-hoster who liked OctoFarm and wants local control, it’s the obvious first stop.
2. Obico — failure detection, not a job queue
Obico (formerly The Spaghetti Detective) is the one to reach for if your real problem is catching failures and getting remote access, not orchestrating a queue. It’s an open-source platform for OctoPrint, Klipper and Bambu printers, and it’s the only major option with a fully open-source detection model you can run locally.
The mechanism is straightforward: the printer plugin grabs a webcam frame at a configurable interval (typically every 30–60 seconds), sends it to the Obico AI engine — cloud or local if self-hosted — and the model returns a confidence score for a likely failure. Above your threshold, Obico can send a pause command to OctoPrint, Moonraker or Bambu, or simply notify you; you choose. Self-hosting processes all video locally, so timelapses never leave your network. The free cloud tier includes detection with a monthly hours allowance and streams at 5 FPS; Pro and self-hosted users get unthrottled 25 FPS.
Be clear-eyed about scope: Obico is monitoring and remote access, not a fleet dashboard with a shared queue and works orders. Pair it with FDM Monster, or pick a platform below that bundles detection in.
3. SimplyPrint — cloud fleet management, any brand
SimplyPrint is a cloud platform for queueing, monitoring and automating fleets of any brand from a browser. It connects Bambu directly, alongside Klipper, Prusa, Marlin, Duet and OctoPrint, and you attach printers by installing on the printer, using the SimplyPrint Client, or running a Raspberry Pi.
Beyond what OctoFarm did — one dashboard, filament tracking, job history, multi-camera monitoring — it adds a print queue with staggered start, AutoPrint for lights-out runs, AI failure detection, a full cloud slicer, a maintenance system and native mobile apps. The trade-off is philosophical: it’s cloud-managed, so there’s nothing to host or patch, but equally no local server you fully own. Pricing has shifted between vendor pages, so check the current rates before committing. We cover it in depth in our SimplyPrint alternative comparison.
4. Printago — built around orders
Printago supports Bambu Lab (cloud and LAN), Klipper and Prusa in a single mixed queue, and leans hard into commerce. Connect an Etsy or Shopify store and orders flow into a smart queue that routes each job to a printer with the right material already loaded — it reads RFID-tagged Bambu filaments automatically to do this. Bambu connects either through Bambu’s cloud (log in, printers appear, no local hardware) or locally via the Fuse bridge on a NAS or always-on machine using LAN + Developer Mode.
Its pricing model is unusual and worth understanding: the free tier gives unlimited printers but one concurrent production slot, and paid plans buy more slots rather than more printers. It’s aimed squarely at US small manufacturers and order fulfilment.
5 & 6. Vendor-native tools for single-brand farms
If your farm is all one brand, the manufacturer’s own tool is often the cleanest answer.
Prusa Connect is free for Prusa owners, including 1 GB of cloud storage for G-code and telemetry, and gives every registered printer its own queue plus production statistics. The cloud service pairs with PrusaLink (local-network only) and a newer early-access option, Prusa Connect Local — a self-hosted dashboard with REST, SSE and MQTT APIs, shared file storage and fleet-wide print history that makes no outbound connections. All of it is Prusa-hardware only.
Bambu Farm Manager runs locally and supports Bambu Lab printers only; a printer added to it is unbound from Bambu Handy, has LAN mode turned off and talks to the Farm Manager server instead. Bambu says current functions are free and that any paid features will be announced in advance.
7. When the job is orders, not just monitoring: Ask The Nozzle Printer Farm
If you are actually selling printed parts, a monitor-and-queue tool only solves the middle of the problem. Ask The Nozzle’s Printer Farm (open beta, free 14-day Workshop trial, no card) runs the whole job end to end across a mixed fleet:
- A web order arrives from WooCommerce (one-click, read-only key), Shopify, or your own custom website connected through the farm’s shop API (a token, no plugin). Orders are pulled in every 10 minutes and matched to part numbers by SKU.
- Stock is used first; one click raises a works order for exactly the shortfall, carrying the due date and customer reference.
- Slicing uses the real OrcaSlicer engine — in the browser Cloud Slicer (with full Printer/Filament/Process presets, imported Orca profiles and STEP conversion), on your own PC through ATN Slicer, or on our servers on Workshop and above. Plates can also arrive from ATN Slicer as versioned revisions.
- The queue dispatches each job to the first free compatible printer with the right filament loaded.
- Cameras with AI failure detection watch each print and alert you; you also get timelapses and a chat assistant on Telegram or Teams.
- Good prints bank into stock and onto the works order, spools are deducted gram by gram, and a true cost per part is recorded (mixed plates split by weight).
- At despatch you confirm the bed is clear and press Despatch; a numbered delivery note is raised, and for a custom website connected through the API the order is marked shipped and the customer emailed automatically (WooCommerce and Shopify are import-only).
It needs a small agent on a Windows or Linux computer that stays on to bridge the printers; your files stay on your own machine. It works with Creality and any Klipper/Moonraker printer, Bambu Lab in LAN mode, FlashForge, OctoPrint, PrusaLink and Duet. Plans run Hobbyist, Workshop and Production — you can start the free 14-day Workshop trial or see current plans.
How to choose
- You liked OctoFarm and want local control: FDM Monster — it even imports your old setup.
- You mainly want to stop failed prints: Obico, self-hosted for privacy or on the free cloud tier.
- Mixed fleet, happy in the cloud, no server to run: SimplyPrint.
- Single-brand farm: Prusa Connect or Bambu Farm Manager — free and native.
- You sell parts and need orders, costing and despatch: Ask The Nozzle Printer Farm.
FAQ
Is OctoFarm still safe to use in 2026?
It still runs, but its last stable release was October 2022, the project has asked for new maintainers, and the FarmPi image was archived in February 2024. There are no security or bug fixes coming, no failure detection, and browsers struggle past about 12 printers. Migrate while you can import your config cleanly.
What’s the closest free, self-hosted OctoFarm replacement?
FDM Monster. It’s an AGPL-3.0 fork that can import OctoFarm printers directly, supports OctoPrint, Moonraker/Klipper, PrusaLink and Bambu LAN mode, and stores data in SQLite rather than MongoDB — a simpler stack than OctoFarm’s.
Do any alternatives work across different printer brands?
Yes. FDM Monster, SimplyPrint, Printago and Ask The Nozzle’s Printer Farm all handle mixed fleets. Prusa Connect and Bambu Farm Manager are single-brand. Match the tool to your actual hardware mix.
Can I keep my files local after switching?
Yes, if that’s a priority. FDM Monster, Obico self-hosted and Prusa Connect Local all run without outbound connections. Ask The Nozzle’s Printer Farm keeps your files on your own machine, bridged by a small agent, with slicing on your PC through ATN Slicer.
Related: 3D Print Farm Order Management: From Web Order to Shipped Box Without the Spreadsheets
Related: Klipper Fleet Management: How to Run Several Klipper Printers Without Babysitting Them
